Supplier and Manufacturer of Wide range of Phosphating Chemicals Such as heavy Zinc Phosphating, low Zinc Phosphating, Manganese Phosphating, iron Phosphating, hot and Cold Phosphating.
PRAM PHOS - PC-918
PC-918 is very useful for the ferrous metals and their alloys. This Phosphating produce heavy Crystalline coating. 5-6 % of PC-918 for every 100 litre of bath and add 0.5% modifier chemical for every 100 litres of bath still the SI paper convert into light blue then add 0.4% starter powder for every 100 litres of bath.
PRAM PHOS - PH-920
PH-920 is very useful for the ferrous metals and their alloys. It acts as an anticorrosive agent and resist against corrosion under controlled humidity, salt spray and adhesion tests. The main functions of phosphating are to prevent corrosion and providing the base forfore treatment, parts should be free of rust, grease, oil etc. 5-6 % o excellent paint adhesion. It is also used for steel surface. Bef PH-920 is used for 100 litres of bath. Temperature should be maintained between 70-80 °C and dipping time is 10-15 minutes.
PRAM PHOS - PH-350
This Zinc Phosphating Chemicals are used in auto parts. This Chemical Produce smooth, grey coating on steel surface . The Components are Phosphate Coated and Sealed with Suitable rust preventive oil. 4-5% of Chemical used for 100 litres of bath. Time for dipping is 10-15 min. at 80- 90 °C.
PRAM PHOS PI-222
Iron Phosphating is Produce an ideal base for subsequent paint finish which also inhibits corrosion. It forms a light iron Phosphating coating on ferrous & steel surface. It can be applied by dipping process. In dipping process, duration of dipping time is 5 to 10 minutes. 5-6% of PI-222 is used for 100 litres tank.
PRAM PHOS PS-131
This Phosphating Produce smooth Coating on ferrous surface. Phosphating are to prevent corrosion & providing base for excellent paint adhesion. It can be applied by spray process. In spray process ,spray duration 90 to 180 seconds at 70-80 °C temperature used 8-10% Concentration.
PRAM PHOS PM-922
Manganese Phosphating Chemicals Produces Phosphate Coating on Cleaned Steel Surface. The Components are Phosphate Coated & sealed with suitable rust preventive oil. It is ideally suited for use on moving parts such as piston rings, gears etc. It is applied by dipping process. The time for dipping is 15-20 min at 90-95 °C temperature. 5-6 % of Chemical used for 100 litres of bath.
PRAM PHOS PC-912
PC-912 is very useful for the ferrous metals & their alloys. PC-912 produce zinc phosphating which is smooth crystalline coating. 5-6 % of PC-912 used for every 100 litres of bath & add 0.5% modifire Chemical for every 100 litres of bath still the SI paper convert into light blue.
PRAM PHOS PW-915
We Manufacture Zinc Phosphate for tube drawing application. It produce medium weight zinc phosphate coating. 5% of PW-915 for every 100 litres of bath & add 0.5% modifier chemical for every 100 litres of bath. Temperature required 75-80 °C. Dipping time is 15-20 minutes.
PRAM PHOS PB-940
This Phosphating Produce Smooth Coating on ferrous Surface. phosphatising are to prevent Corrosion & Providing base for excellent paint adhesion. It can be applied by spray & brush. It is also used in hot & Cold Phophating.