We are Supplier and Manufacturer of Other Chemicals as Per Client’s requirements Such as Rust Remover, Rust Converter, Galvanize Cleaner, oil Remover, Degreasing and Derusting Chemicals, Carbon Remover, Oil Rust Remover etc.
Pram Clean - RR-550
RR-550 Removes light oil, rust etc. It is a Versatile General Purpose Cleaner. It is very safe to use on all metal & non-metals. It is used in panel board, engineering, machinery etc. The parts should be dipped for 15-20 minutes. in rust remover. 30-35 % RR-550 used for 100 litres of bath.
Rust Converter - RC - 444
RC - 444 is a Solution which on applying Converts the existing Steel rust into a stable metal Complex by forming a polymeric film over it. The Polymeric and Passivation Coating preventing future Corrosion which in turn acts as an ideal base for painting. RC-444 results with all the layers and forms a stable non-reactive complex organ, metallic surface having bluish-black colour. Apply RC-444 properly with brush, spray, and roller or by dipping. The first coat dry completely for 24 hours to ensure the complete reaction of RC-444 with rust. Then the surface is ready to receive any kind of future coat. It is used in structured steel tanker, overhead water tanks, heavy drilling rigs, pipe and tube stock, cranes, chemical process equipment and storage tank etc.
Pram Clean - 133
PC - 133 is used for remove oil, grease from the surface of galvanize. It is applied by brush, dipping and wiping. 15-20 % of PC - 133 is used for 100 litre bath. The time for dipping is 15-20 minutes.
OIL REMOVER OR - 444
OR - 444 is an acidic type metal Cleaner. It is used for remove oils and soils from Aluminium, iron and Zinc, Steel and Casting Surface. It is applied by dip and Spray Process. 20-25 % of OR - 444 is used for 100 litre of bath. The time for dipping is 15-20 minutes.
DEGRESING DERUSTING CHEMICALS DD-44
DD-44 is water white Phosphoric acid based Chemical. It is Soluble in Water. It is used for removing soil, oil and light rust. It is used normally 25-30% in 100 liter of bath. The time for dipping is 20-25 minutes.
Carbon Remover - CR - 300
CR - 300 is used for remove Oil, Rust, Carbon, Soil from the Surface of metal Components. It is applied by dipping used for 30-35 % of CR-300 is used for 100 liter of bath. The time for dipping is 25-30 minutes.
Oil-Rust Remover - ORR - 350
ORR – 350 can be used for removing light oil, light rust, soil from the surface of metals. 25-30 % of ORR-350 used for 100 liter of bath. It is applied by dipping process. The time for dipping is 15-20 minutes.
Scale Remover – SR - 25
SR – 25 is acidic and neutral Cleaner. It is used for removal of scales from Tubes, pipes, boilers and heat exchanger and black M.S. sheets.